The 37mm profile sections are designed to interlock to give maximum security when closed. Small profiles have improved rolling characteristics allowing smaller head space requirement, the 37mm profile only requires as little as 150mm headroom. Every secure-roll shutter comes complete with reinforced bottom rail section giving added security when closed. When using a manual counterbalance operating system the locking section will be incorporated in a specially designed extruded base rail which has recessed locking bars giving added security against forced entry.

Dome face guide caps are also available serving a dual role of covering all fixing points, giving added security as well as giving the guide section a more aesthetically pleasing finish when used in a face fix environment.

Secure-roll 37 has a choice of guide sections to suit most applications . All guide sections (below left) come complete with brush strips.





Profile maximum 8.5 Sqm, Manual operation maximum size 5 Sqm



All of the height calculations for the box sections (above right) are based upon a 60mm octagonal axle. If exceeding a span of 2000mm please allow for a 70mm axle which may alter the head plate size. Please contact us with your measurements and needs to verify your plate details prior to ordering.

55mm profile allows the compromise of physical strength against size. With the strength of profile to allow a span of up to 4000mm but with good rolling characteristics, make the Secure-roll 55 the next step in security shutter applications. Headroom requirement from 205mm and a standard guide section of 75mm x 27mm. All Secure-roll 55 come complete with heavy duty base rail as standard, incorporating a base seal. Angular Aluminium head plates complete with two part aluminium housing cover.

Reinforced aluminium angular head plates are fully finished in white or brown as standard. All head plates feature a specially designed hard wearing nylon roller entry system ensuring Secure-roll operates perfect every time.

Specially designed guide section, incorporating heavy duty brush seal, eliminating draughts and noise. Every guide section is fully finished in a powder coated paint covering, standard colours, white and brown Guide section specification: 75mm x 27mm.

Profile maximum 13 Sqm Manual operation maximum size 6.5 Sqm

77mm profile is a heavy duty extrusion designed to interlock to give maximum security when closed. Larger profiles allow greater spans to be covered in one shutter, as the profile is stronger.

The Secure-roll 77mm profile is able to span up to 6500mm in a single shutter. Secure-roll 77 is also available in a punched format supplied with optional glazing. The punched sections are 100mm x 40mm with 25mm between open sections, the punching detail can be inline or brick bond pattern in design.

Secure-roll 77 shutter comes complete with reinforced bottom rail section complete with heavy duty base seal, giving added security when closed. When using Secure-roll 77 on larger applications a sliding head plate mechanism is utilised, reducing shutter deflection.




All of the height calculations for the box sections above height calculations are based upon a 80mm octagonal axle. If exceeding a span of 4500mm please allow for a 100mm axle which may alter the head plate size.